PCB layout and schematic of ADA Flanger using MN3101?

[shadowmaster]

Is there anyone in this forum who is kind enough to share to me a verified PCB layout and schematic of an ADA Flanger? The version which uses MN3101? I've built Flanger 301 from Tonepad successfully and I've been itching to build another flanger (particularly the Deluxe Electric Mistress). But sad to say, like most of the other schematics and PCB layouts of flangers floating around employs the use of the chip SAD1024 which I can't find in our country. Fortunately, MN3101is being sold here.

I've done some searching but most links regarding the PCB layout and schematic of ADA Flanger employing MN3101 are dead.

You can e-mail it to me if you can't post it here.

ryanogal@lycos.com

Thanks

[TELEFUNKON]

just FYI:
the MN3101 is only a clock-generator,
not a BBD...

you might be looking for a different numbered chip?

[redeffect]

The reissue a/da flanger uses an MN3010 dual 512 stage BBD. The 3101 is a clock generator. This flanger does not use this chip. The clock circuit is based around a 4007 and a 4047. If you have a source for MN3010; please let me know. This chip is one hard mutha to locate. 
May your search be fruitful...
red

[captntasty]

Just took a peek out there for the MN3010....  don't know anything about this operation, but I guess the chips can be had for a price.

http://www.techsonicusa.com/77

As for a schematic... again, can't say I have any experience ordering from this outfit... but they do have schematics and board layouts.

http://www.schematicconnection.com/store/asp/default.asp

Good luck

[Michael Allen]

http://www.freewebs.com/loudnoise/ADA%206%2D17.rar

From Bill Bergman

[shadowmaster]

just FYI:
the MN3101 is only a clock-generator,
not a BBD...

you might be looking for a different numbered chip?

Thank you for pointing out my mistake. It is MN3010 and not MN3101. Stupid me.

The reissue a/da flanger uses an MN3010 dual 512 stage BBD. The 3101 is a clock generator. This flanger does not use this chip. The clock circuit is based around a 4007 and a 4047. If you have a source for MN3010; please let me know. This chip is one hard mutha to locate. 
May your search be fruitful...
red

Well, I'm hoping that I can get a hand on this. I'll let you know.

http://www.freewebs.com/loudnoise/ADA%206%2D17.rar

From Bill Bergman

Thanks Michael!!!