Some doubts regarding wiring two pedals in one box

[nebucanazza]

I am thinking of making a couple of dual effects - a dual boost(with Sparkle Boost + Peppermill) and a dual amp sim box( Professor Tweed + Eighteen). Now for the dual boost, I would like to have bypass, either effect on or both on together. For the dual amp sim, it should be bypass or one effect on. According to my understanding, for the first case the following arrangement of two 3PDTs should work : http://aronnelson.com/gallery/The-Mod-Zone-%21/WIRING_2_FX_IN_1_BOX
For the second case, I was thinking of a single 3PDT on/off with a DPDT On-On toggle( For Tweed/ Marshall ) sending the signal to either circuit but not both. Will this work or I am way off target ? Any links for this kind of wiring?

[Meanderthal]

[nebucanazza]

Wow..that was fast!! Thanks a ton bro

[Meanderthal]

 Not a problem.

[Mika]

Sorry. Please I need Help.
2 Effect in One box.
3 Footswitch:
a) On/bypass
b) A or B
c) A and B.... A -> B -> Out

Tanks
Best Regards

[antonis]

Best regards too butn what exactly is your query..??

[Mika]

Best regards too butn what exactly is your query..??

2 effect in one box, and 3 footswitchs 3pdt.

First: on/Bypass
Second: select effect A or effect B to output
third: select both effect in order A -> B -> Output

thank you so much
Best Regards

[antonis]

Something like this, perhaps..??

[Mika]

Something like this, perhaps..??

Uáu... fantástic.... but I need 2 effect in this. 3 swtichs and 2 PCB :-)

fabulous thankful

[Mika]

Sorry. Please I need Help.
2 Effect in One box.
3 Footswitch:
a) On/bypass
b) A or B
c) A and B.... A -> B -> Out

Tanks
Best Regards

Like This, but other footswitch to connect Effect 1 + Effect 2 -> Output

[bluelagoon]

What Mika is looking for effectively is the same switching format that is used in the Way Huge, Camel Toe effect pedal, where there are 2 way huge fx, the Green Rhino and the Red Lama. if you can figure that one out, then we may have the desired result. Would be happy to know how the Camel Toe switching works myself, for a project of my own. Its difficult to analyze from the MK2 Camel Toe, but the original Camel Toe, inside the open box does reveal a great deal on the switching wire up. Also appears there is a relay in the switch mix, just to make things harder, next to and in between the 2 footswitches. looks like a tough nut to crack. Good Luck Jim.
See attached images

Cheers.