DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Esppse on July 14, 2021, 03:24:21 PM

Title: Is there a germanium FUZZ that uses boatloads of Germanium transistors
Post by: Esppse on July 14, 2021, 03:24:21 PM
Heh, I have so many germanium transistors and I wanted to embark on a project that uses as many of them as possible to diminish my stash lol. Are there fuzzes that use 6-10 in one circuit? I've seen silicon fuzzes go that high.  :)
Title: Re: Is there a germanium FUZZ that uses boatloads of Germanium transistors
Post by: tonyharker on July 14, 2021, 04:23:07 PM
Don't use them. Store them until their value goes up and then cash them in. :) ;)
Title: Re: Is there a germanium FUZZ that uses boatloads of Germanium transistors
Post by: Steben on July 15, 2021, 03:22:19 PM
(http://diy-fever.com/wordpress/wp-content/uploads/2016/02/mullard_amp.png)

Deacy style amps....  :icon_mrgreen: :icon_mrgreen: :icon_mrgreen:
Title: Re: Is there a germanium FUZZ that uses boatloads of Germanium transistors
Post by: r080 on July 15, 2021, 04:33:58 PM
You could use them like germanium diodes in a big muff. To match the silicon forward voltages, you would need 8 total. This would be a great way to use the leakiest ones.
Title: Re: Is there a germanium FUZZ that uses boatloads of Germanium transistors
Post by: Mark Hammer on July 15, 2021, 05:00:43 PM
I probably have a few hundred.  A rather incoherent local electronics store, that went out of business a decade back, was selling bubble-pak cards with 5 or 6 to a card for a dollar, so I bought fistfuls of them.  Most are leaky or have unrealistically high hfe.  But I use a couple now and then.  Made General Guitar Gadgets' "Boutique Bender" with a trio of 2SB33 transistors, and use a pair as diodes for a buddy's Colorsound Overdriver (Throbak version).  Sounds nice. 
Title: Re: Is there a germanium FUZZ that uses boatloads of Germanium transistors
Post by: mozz on July 15, 2021, 08:50:26 PM
I've just bought a few hundred of the 2sb714, high gain but high leakage. I solder one on the back of the fuzz pcb to counteract the leakage of Q1, no need to do that for Q2, but i am up to 3 on a board.
Title: Re: Is there a germanium FUZZ that uses boatloads of Germanium transistors
Post by: bowanderror on July 16, 2021, 04:39:02 PM
A while back, SamHay posted a Discrete Germanium Opamp (https://www.diystompboxes.com/smfforum/index.php?topic=117300.0) build, along with a Tube Screamer-style drive (https://i.imgur.com/8a5r1Og.png) using it. You can find a perf layout for it here (https://i.imgur.com/aqP37QK.png). It uses Ge transistors for Q1-3, but you can socket the others and try out more Ge transistors.
Title: Re: Is there a germanium FUZZ that uses boatloads of Germanium transistors
Post by: duck_arse on July 17, 2021, 11:28:22 AM
build a germanium big muff [there is a thread somewhere] and use transistors for all the diodes.
Title: Re: Is there a germanium FUZZ that uses boatloads of Germanium transistors
Post by: Pete Moore on July 17, 2021, 01:40:42 PM
 
Skip to Q's socket in circuit for sound,
And variable bias.
Consider each gain circuit as source for noise.
Or..first...
Ge leakage/gain measuring circuit, separated the "good as a diode" leakers, bias resistant devices.
Title: Re: Is there a germanium FUZZ that uses boatloads of Germanium transistors
Post by: ThermionicScott on July 19, 2021, 08:10:13 PM
An active EQ and buffer at the end would put a few more transistors to work.   :icon_idea: