Print Page - Red Llama breadboard schematic

Title: Red Llama breadboard schematic
Post by: m7b52000 on January 29, 2024, 10:44:22 PM

I am about to play with and mod the Red Llama on breadboard using the schematic from Beavis. It looks as though the Vol pot is incorrectly grounded to the power rail instead of the Gnd rail. Am I correct?
(https://i.postimg.cc/d7rNCbgK/Screenshot-2024-01-30-at-2-04-46-pm.png) (https://postimg.cc/d7rNCbgK)

Title: Re: Red Llama breadboard schematic
Post by: antonis on January 30, 2024, 03:29:18 AM

Yes, indeed.. :icon_wink:

P.S.
It should also work as it is due to C1 (AC ground) with pot crackling probability but better move lug 1 to GND..

Title: Re: Red Llama breadboard schematic
Post by: m7b52000 on January 30, 2024, 06:45:02 PM

It works perfectly with Vol 1 to Gnd. I shall leave it there...

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: m7b52000 on January 29, 2024, 10:44:22 PM