Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: bass_econo on January 12, 2005, 09:37:07 AM

Title: How can I remove the EH Polychorus boost
Post by: bass_econo on January 12, 2005, 09:37:07 AM
All,

I did a search to try to find some answers and I came up with the obvious resistor fixes etc., but I was wondering if there was a less band-aid approach to correcting the boost of the pedal.  

Can anyone help?

James
Title: How can I remove the EH Polychorus boost
Post by: bass_econo on January 13, 2005, 08:31:52 AM
Anyone?
Title: How can I remove the EH Polychorus boost
Post by: p1_ind on January 13, 2005, 11:08:04 AM
You could add a volume control to the end of the circuit using a pot mounted on the case to control the volume or a trimmer pot inside to control the volume.
Or you could even add a JFET booster to the end of the circuit with a external volume control or an internal trimmer pot so that you have more control over the volume up or down.

Adam
Text only | Text with Images