Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Mark Abbott on March 04, 2005, 07:35:40 AM

Title: Palmer circuit diagram Tri-line splitter PGA-01
Post by: Mark Abbott on March 04, 2005, 07:35:40 AM
I was wondering if anyone can help me out.

I have been given a Palmer Tri-line splitter buffer to fix. The fault is hum in the "B" channel of the buffer.

This device has three DIP switches on it, but I'm not too sure exactly what they do, in fact I didn't even see anything in the online manual about the DIP switches.

Thanks for all your help

Yours Sincerely

Mark Abbott.
Title: Palmer circuit diagram Tri-line splitter PGA-01
Post by: Preben Hansen on March 04, 2005, 09:03:50 AM
According to to the catalog at the Palmer site they are ground lift switches.
/Preben
Title: Palmer circuit diagram Tri-line splitter PGA-01
Post by: Mark Abbott on March 04, 2005, 06:44:35 PM
Dear Preben

Thanks for your help. Did you go to palmerdirect.com, or the company in Nashville?

Again thanks for your help.

Yours Sincerely

Mark Abbott.
Text only | Text with Images