Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: skiraly017 on April 04, 2006, 12:12:01 PM

Title: Do the lug numbers on a DPDT and a 3PDT match up?
Post by: skiraly017 on April 04, 2006, 12:12:01 PM
A layout that I'm looking at calls for a DPDT switch (not stomp) to engage an effects loop and all 6 lugs are used. I'd like to change it to a stomp with an LED, so I'm assuming that a 3PDT is needed. Do I just move lug 1 of the DPDT to lug 1 of the 3PDT and so on? Thanks.
Title: Re: Do the lug numbers on a DPDT and a 3PDT match up?
Post by: twabelljr on April 04, 2006, 12:21:58 PM
DPDT to 3PDT:  http://www.diystompboxes.com/pedals/images/DPDT3PDT.jpg
(http://www.diystompboxes.com/pedals/images/DPDT3PDT.jpg)

3PDT with LED:  http://www.diystompboxes.com/pedals/images/3PDTwiring.jpg (http://www.diystompboxes.com/pedals/images/3PDTwiring.jpg)
Title: Re: Do the lug numbers on a DPDT and a 3PDT match up?
Post by: skiraly017 on April 04, 2006, 12:46:38 PM
Much thanks!
Text only | Text with Images