Print Page - ROG Double D... VERO LAYOUT

Title: ROG Double D... VERO LAYOUT
Post by: Toney on April 09, 2006, 10:34:27 AM

This should be fun..
Sweet crunchy drive and then switchable to "11" via a DPDT.
I've only just finished this one, haven't built it yet but it sounds great from the clips I've heard.
Hope you like it. :D

(http://i2.photobucket.com/albums/y16/stm88/doubleDv5.png)

Coming soon....................Fender Blender

Title: Re: ROG Double D... VERO LAYOUT
Post by: JimRayden on April 09, 2006, 10:54:46 AM

Looks relatively tight and clean. I like it. Will build one. :)

----------
Jimbo

Title: Re: ROG Double D... VERO LAYOUT
Post by: Toney on April 10, 2006, 02:54:34 AM

Groucho voice... reminds me of a dame I met in Philly..

Title: Re: ROG Double D... VERO LAYOUT
Post by: Xavier on April 10, 2006, 03:33:05 AM

This one looks tempting, according to the ROG sound samples. I'll build it. Not right away as Im moving to another apartment this week, but I'm still in need of a high gain dist, and none of the ones I've built seem to suit my needs.

Thanks again Toney

Title: Re: ROG Double D... VERO LAYOUT
Post by: MartyMart on April 10, 2006, 05:25:01 AM

Nice layout ... well done Toney, samples are great for this one ;D

MM

Title: Re: ROG Double D... VERO LAYOUT
Post by: ezanker on April 22, 2006, 03:58:18 PM

Hi Toney,
I have this one on the breadboard right now and have yet to try out vero, so I think I'm going to give this a try.

Two questions:
1. In the ROG schematic R7 is 120K and you show it as 470K. Is this a typo, or did you mod the circuit for a specific reason?
2. R12 appears to be there by accident. It is not connected to anything and is not shown in the schematic. Is this just a "cut and paste injury" or maybe left over from a previous revision?

Thank you very much for providing this layout! As soon as I finish, I'll report back to you...

Erik

Title: Re: ROG Double D... VERO LAYOUT
Post by: Toney on April 22, 2006, 07:52:39 PM

Definite typo. Nice pick up, thanks.

Those 10ks to ground are pot grounding points, looks like I left an extra, I had to be pretty careful to leave enough provisions for wire-holes with this one.

Will update soon.

Title: Re: ROG Double D... VERO LAYOUT
Post by: ezanker on April 25, 2006, 12:07:55 AM

I think my last post yesterday got lost...

Toney, I went ahead and soldered the DoubleD this weekend as my first vero project (only perf up to now). Your layout worked perfectly, so consider it verified (if it wasn't already). ;D

For anyone else interested, I recommend this circuit as a good sounding and flexible distortion. Thanks to ROG for this design and thanks again Toney for providing this layout.

Erik

Title: Re: ROG Double D... VERO LAYOUT
Post by: Toney on April 25, 2006, 04:32:58 AM

My pleasure!

Yours is the first build report I've seen.

I'm happy we can call it verifed. :D

Title: Re: ROG Double D... VERO LAYOUT
Post by: JimRayden on April 25, 2006, 03:06:43 PM

Building it right now... R3 is 470 ohms, not 470K as noted on your layout. I'll report if I find any more glitches.

----------
Jimbo

Title: Re: ROG Double D... VERO LAYOUT
Post by: Toney on June 12, 2006, 01:27:31 PM

Please note.

The current version is updated, verified and correct.

Title: Re: ROG Double D... VERO LAYOUT
Post by: jdwalker on September 07, 2009, 11:39:19 AM

it would be greatly appreciated if someone could reposed the vero layout, the original image seems to be missing. thanks

Title: Re: ROG Double D... VERO LAYOUT
Post by: jrod on September 08, 2009, 03:22:46 PM

Hey there jdwalker. Search the Gallery (http://www.aronnelson.com/gallery/main.php). I'm willing to bet you will find a vero layout of the Double D there.

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Toney on April 09, 2006, 10:34:27 AM