Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: doug deeper on October 11, 2008, 04:57:43 PM

Title: 16mm dual gang 1k pots?
Post by: doug deeper on October 11, 2008, 04:57:43 PM
i cant find these anywhere! do they exist?
(cue mouser link)
Title: Re: 16mm dual gang 1k pots?
Post by: liddokun on October 11, 2008, 05:39:29 PM
Small bear has 5k versions of them....is 2.5k alright?  You could put a 5k resistor in parallel to it and get 2.5kpot. 
Sorry I'm not any more helpful.
Title: Re: 16mm dual gang 1k pots?
Post by: doug deeper on October 11, 2008, 06:38:33 PM
yeah thats a possibility.
1k would be soooo easy though!
the circuit im working on already has a 5k dual gang in it so maybe i'll give that a whirl.
Title: Re: 16mm dual gang 1k pots?
Post by: John Lyons on October 11, 2008, 10:12:24 PM
You could try futurlec.
They have a few dual 16mm post.
Split shafts but they work fine with set screw knobs...

john

Title: Re: 16mm dual gang 1k pots?
Post by: Zben3129 on October 11, 2008, 10:36:25 PM
POT1KDUAL     <--- Part # at futurlec.

Also, they only have pcb pins. I usually just stick wires through the little holes, works fine for me.

Zach
Title: Re: 16mm dual gang 1k pots?
Post by: doug deeper on October 12, 2008, 10:07:38 AM
yeah i cant deal with those futurlec pots, i had about 100 of them that went out in pedals and ive been replacing them one at a time ever since. (they just stop working).
i also have 2 order ive been wait on from them for about a month.
Title: Re: 16mm dual gang 1k pots?
Post by: Zben3129 on October 12, 2008, 12:04:36 PM
The fact that futurlec has 1k dual gang pots made by alpha means they do exist, though. Now its just a matter of finding them A stock.

Zach
Text only | Text with Images