Print Page - Boss Metal Zone MT-2 schematic with labeled components

Title: Boss Metal Zone MT-2 schematic with labeled components
Post by: hillio on December 28, 2008, 01:45:30 PM

I downloaded the MT-2 schematics from http://www.mif.pg.gda.pl/homepages/tom/files/MT2.zip (http://www.mif.pg.gda.pl/homepages/tom/files/MT2.zip)
They are good schematics, pretty easy to follow, but I was wondering if anyone had or knew of a set of prints that have the components labeled. There are a lot of recommendations for mods on this pedal, many from old posts on this forum, that reference the components by a number (C2, D3, R7 etc). But I have no way of knowing what sort of list/key the authors were using when they referenced the components. Any help will be greatly appreciated.

Thanks

Title: Re: Boss Metal Zone MT-2 schematic with labeled components
Post by: ZebCahan on December 29, 2008, 02:47:09 AM

Hi,
I found this schematics to be usefull when I modded mine.

http://web.tiscali.it/boxsmt2clone2005home/index.htm
Its under "Boss MT2 Schematic".

/Sebastian

Title: Re: Boss Metal Zone MT-2 schematic with labeled components
Post by: hillio on December 29, 2008, 10:04:20 AM

Yeah, that's pretty much what I was looking for.

Thanks a bunch.

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: hillio on December 28, 2008, 01:45:30 PM