Print Page - GE Diodes- will these work? They're matched?

Title: GE Diodes- will these work? They're matched?
Post by: jimbob on January 08, 2009, 08:59:57 PM

I needed some ge diodes to finish a few projects so I went to the local NTE supplier and cross referrenced 1n34a to nte 109, 110, and 110mp (matched pair). Heres the data sheet http://www.nteinc.com/specs/100to199/pdf/nte110mp.pdf (http://www.nteinc.com/specs/100to199/pdf/nte110mp.pdf) I assume these will work as a replacement 1n34a?

Title: Re: GE Diodes- will these work? They're matched?
Post by: km-r on January 08, 2009, 09:11:41 PM

of course... i think most Ge diodes will work well for 1n34... if the application is not very spec-critical...

what projects are you referring to? if its signal clipping, it should work.

Title: Re: GE Diodes- will these work? They're matched?
Post by: jimbob on January 08, 2009, 11:30:58 PM

This is for the COT50

Title: Re: GE Diodes- will these work? They're matched?
Post by: mikemaddux on January 09, 2009, 05:22:16 AM

Thats wierd, I just did the same thing today. got 2 matched pairs of 110mp today

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: jimbob on January 08, 2009, 08:59:57 PM