Print Page - adding a status LED to a power supply

Title: adding a status LED to a power supply
Post by: sjaltenb on January 26, 2009, 06:53:00 PM

hello,

i simply tapped off of the final 9v rail before the output a current limiting resistor and a 3mm LED. any reason why this would not work?

thanks as always.

Title: Re: adding a status LED to a power supply
Post by: oskar on January 26, 2009, 08:14:19 PM

Should work just fine.

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: sjaltenb on January 26, 2009, 06:53:00 PM