Print Page - Drill size for pots and footswitch

Title: Drill size for pots and footswitch
Post by: Kitarist on May 31, 2009, 12:18:40 PM

I really need the drill size for the pots and a footswitch because it seems i didnt get the enclosure predrilled

Thanks!!!

Title: Re: Drill size for pots and footswitch
Post by: rousejeremy on May 31, 2009, 12:30:08 PM

Check out the wiki above for all sorts of info. http://www.diystompboxes.com/wiki/index.php?title=Main_Page

Title: Re: Drill size for pots and footswitch
Post by: Ripthorn on May 31, 2009, 08:05:01 PM

If you search for encyclopedia or something like that, one of the forum members has an entire pdf document listing common sizes for pots, switches, jacks, iec sockets and on and on. Very good stuff.

Title: Re: Drill size for pots and footswitch
Post by: Andi on June 01, 2009, 07:19:28 AM

Or buy yourself a set of digital verniers and measure them yourself - it's good to be able to do these things rather than have to hope someone else has already done it on the same parts you have. ;)

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Kitarist on May 31, 2009, 12:18:40 PM