Print Page - True-Bypass / Feedback Loop PROBLEM

Title: True-Bypass / Feedback Loop PROBLEM
Post by: kinski on October 06, 2009, 11:24:29 AM

So, I built this looper:

http://www.beavisaudio.com/techpages/PedalHacker/LooperWithFeedbackLoop.gif

Everything works just fine, except when the true-bypass loop is engaged, I can still here the feedback loops making lots of noise (but its much quieter than if the feedback loop was properly engaged, but still quite loud). I can only here the bleed of the feedback loop when I am using LOTS of high gain.

Any ideas as to what's happening? ???

Title: Re: True-Bypass / Feedback Loop PROBLEM
Post by: alanlan on October 07, 2009, 08:17:33 AM

Does it change if you toggle the SPDT switch?

Title: Re: True-Bypass / Feedback Loop PROBLEM
Post by: anchovie on October 07, 2009, 09:33:15 AM

Are you using normal wire or shielded?

(edited to just be a simple question rather than speculating when feeling tired!)

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: kinski on October 06, 2009, 11:24:29 AM