I'm interested in building one from Geofex, but I can only find a layout, not a PCB per se: http://www.geofex.com/FX_images/parapedal_layout.gif
Is there a PCB with traces only?
Quote from: Rocket Roll on October 31, 2009, 10:42:46 AM
I'm interested in building one from Geofex, but I can only find a layout, not a PCB per se: http://www.geofex.com/FX_images/parapedal_layout.gif
Is there a PCB with traces only?
Yes there is:
(http://i752.photobucket.com/albums/xx161/andre_schaap/ParapedalWahPCB.gif)
Thanks a million! Where did you find it? I couldn't find it for the life of me ;D
Quote from: Rocket Roll on October 31, 2009, 04:57:22 PM
Thanks a million! Where did you find it? I couldn't find it for the life of me ;D
Is there a BOM floating around as well ?
Thanks, Dan
Quote from: Rocket Roll on October 31, 2009, 04:57:22 PM
Thanks a million! Where did you find it? I couldn't find it for the life of me ;D
Someone - probably Andre - did the obvious and used photoshop or equivalent to make the traces black.
However, with no identification of the origin on it, this is going to be another one of those layouts I can't fix. Andre, would you please add the information about where you got that onto the layout?
In fact someone mailed me this:
(http://i236.photobucket.com/albums/ff26/sauerkret/parawahBW.jpg)
and asked me to make him a PCB of it.
Because of the poor quality I redraw it using Photoshop.
I have no idea about where he found this layout, but I emailed him about it,
and I will let you know his answer.
R.G. although I don't understand what you mean with:
QuoteHowever, with no identification of the origin on it, this is going to be another one of those layouts I can't fix
,
as far as I'm concerned you are of course free to put in on geofex if you want to.
Quote from: Andre on November 01, 2009, 08:30:43 AM
In fact someone mailed me this:
...
and asked me to make him a PCB of it.
Because of the poor quality I redraw it using Photoshop.
Yep. Thought that was what happened.
QuoteI have no idea about where he found this layout, but I emailed him about it,
and I will let you know his answer.
R.G. although I don't understand what you mean with:
QuoteHowever, with no identification of the origin on it, this is going to be another one of those layouts I can't fix
,
Sometimes I make a mistake in a layout. Unfortunately, if no one knows were it came from, they never go back to the source for any corrections, so the error is propagated forever on the net. There are some early versions of the Neovibe which had errors; I still get the occasional email yelling at me about that one.
I don't know, for instance, if that one is correct or not. I have not traced it against my original.
Quote
as far as I'm concerned you are of course free to put in on geofex if you want to.
That's nice of you... :icon_biggrin:
However, I did the right thing and updated the earlier layout. It now has trace-only images for toner transfer, and it matches the original layout. See:
http://geofex.com/FX_images/newparapedal.pdf (http://geofex.com/FX_images/newparapedal.pdf). The old gif link no longer works, as it's been removed.
Could you please remove your photobucket image and instead point to the layout at geofex?
Quote
as far as I'm concerned you are of course free to put in on geofex if you want to.
That's nice of you... icon_biggrin
:icon_biggrin: I was not aware that the PCB design was yours.
"nice schematic link"-read... (http://www.diystompboxes.com/smfforum/index.php?topic=79636.msg657797#msg657797) :icon_wink:
Quote from: Andre on November 01, 2009, 03:53:41 PM
:icon_biggrin: I was not aware that the PCB design was yours.
No problem. That's why I put the smilie there - I wasn't ranting at you. Still mates. If you ever get to Texas, we'll go have some local beer. Although I'm afraid that your local stuff is much better than ours. :icon_lol: