Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: nboyer941 on February 22, 2010, 12:23:03 PM

Title: help a newbie build a simple box
Post by: nboyer941 on February 22, 2010, 12:23:03 PM
Hey, I'd like to build this pedal:

I want it to be an a/b box (2 in 1 out). Then also, I want a mute switch on the bottom. I want three led's (one for each of the 2 inputs and one for the mute switch). I want it powered by a standard boss 9v adapter.

Could someone guide me in the right direction as far and how to go about this and where to buy parts? I do know how to soldier quite well.

Thanks a lot
Title: Re: help a newbie build a simple box
Post by: jkokura on February 22, 2010, 12:36:21 PM
http://www.fulltone.com/PDfFiles/AB_switcher.pdf
(http://www.fulltone.com/PDfFiles/AB_switcher.pdf)
To start with ^ a good A/B layout. How to add a kill switch with an LED is another matter, but I'm sure someone can help out. I imagine all you'd need a s DPDT that goes from the output of the A/B. Someone else might have a diagram to guide you to.

Jacob
Text only | Text with Images