Print Page - Marshall Blues Breaker Vero layout ?

Title: Marshall Blues Breaker Vero layout ?
Post by: dave4567 on September 16, 2011, 12:06:56 AM

Would anyone happen to have a vero layout for the Marshall BluesBreaker? Any help would be appreciated.

Title: Re: Marshall Blues Breaker Vero layout ?
Post by: dave4567 on September 23, 2011, 12:10:46 AM

Since I couldn't find a vero layout , I tried doing my own. I used the schematic from GGG's True Bypass. If anyone has the time can they check this out for mistakes. Thanks.

http://www.aronnelson.com/gallery/main.php/v/Schematics-etc/Marshall.jpg.html

Title: Re: Marshall Blues Breaker Vero layout ?
Post by: cab42 on September 23, 2011, 02:37:46 AM

I haven't checked the layout, but you can make it a few rows smaller

1. Move 9V (and D1) two rows down
2. Move the .22cap to gain 3 a few holes to the right. Move the lower pin one row up, place a trace cut between that pin and the resistor, and move gain 3 to the right of the board.

BTW: I have Torchys BB vero layout. PM me if you are interested. However, its much more fun to use your own.

Title: Re: Marshall Blues Breaker Vero layout ?
Post by: dave4567 on September 23, 2011, 07:52:13 AM

Thank you for the suggestions Cab42 :)

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: dave4567 on September 16, 2011, 12:06:56 AM