Can anyone confirm the orientation of the transistors for this layout? I'm figuring the the tab faces the bottom in this case, and based on past experiences, means that's 100% wrong and should be facing the top of the page. Here's the layout i'm using:
(http://i40.tinypic.com/jfhz0k.gif)
http://www.technifest.com/fact19aa.jpg
the schematic tells all:
(http://4.bp.blogspot.com/-1ff99JJTw3E/T2CnH5-10eI/AAAAAAAABF0/Uxx7br32i2I/s1600/SiliToneBender.GIF)
Q1's emitter (the tab) hits the 1K...
Quote from: LucifersTrip on April 16, 2012, 11:22:01 PM
the schematic tells all:
Q1's emitter (the tab) hits the 1K...
Ah, had never seen the schematic for this before- looks like I had it right! thanks!
This one sounds really good with an input cap blend pot: I'll post and updated layout later tonight.
http://www.aronnelson.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=18323&g2_serialNumber=1
(http://www.diystompboxes.com/pedals/gusFuzzFace.gif)
(http://www.diystompboxes.com/pedals/3tran.JPG)
Then the rocket, an adjusted 3 transistor note the distortion sections. This stuff has been up on the web for years.