(http://www.pedalenclosures.com/DesktopModules/Revindex.Dnn.RevindexStorefront/Portals/0/Gallery/0437ad46-fa82-46f3-8599-98e83bbf1f90.jpg)
Pedalenclosures' ONE (http://www.pedalenclosures.com/ProductDetail/tabid/104/rvdsfpid/one-unfinished-3/rvdsfcatid/one-3/Default.aspx)
size? Is it essentially an ultra-wide Boss/DOD/Ibanez, etc? Definitely intriguing.
Here is an eBay auction with size informantion. (http://www.ebay.com/itm/DIY-Boutique-Stompbox-Pedal-Enclosure-/120896033826?pt=Guitar_Accessories&hash=item1c25f71422)
Pedal Enclosures from pedalenclosures!
Introducing the ONE!!!
6 1/4" wide 5 1/8" Deep.
Perfect for multistomp designs.
Plenty of room for knobs/switches.
Switch area (2 1/8" x 6 1/4")
offset to keep your feet away from the controls.
Control Area 2 3/4 x 6 1/4" wide.
Countersunk bottom screws won't
interfere with Velco pedalboards.
I really like that enclosure!!! I like the others also... Thanks for sharing!
There not a afraid to charge .......19.99 $ for one box !!
I used one of their YY boxes for a project. It was well built, though the walls were almost too thick for 1/4" phone jacks.
Anyone tried one of these yet?
http://www.ebay.com/itm/60s-Reissue-Pedal-Enclosure-Fuzz-Project-Box-Made-in-USA-RI-Folded-Steel-/320781926498?pt=Guitar_Accessories&hash=item4ab017c062 (http://www.ebay.com/itm/60s-Reissue-Pedal-Enclosure-Fuzz-Project-Box-Made-in-USA-RI-Folded-Steel-/320781926498?pt=Guitar_Accessories&hash=item4ab017c062)
Quote from: Electron Tornado on April 22, 2012, 02:23:44 PM
I used one of their YY boxes for a project. It was well built, though the walls were almost too thick for 1/4" phone jacks.
Anyone tried one of these yet?
http://www.ebay.com/itm/60s-Reissue-Pedal-Enclosure-Fuzz-Project-Box-Made-in-USA-RI-Folded-Steel-/320781926498?pt=Guitar_Accessories&hash=item4ab017c062 (http://www.ebay.com/itm/60s-Reissue-Pedal-Enclosure-Fuzz-Project-Box-Made-in-USA-RI-Folded-Steel-/320781926498?pt=Guitar_Accessories&hash=item4ab017c062)
I was going to try those out but I am hesitant because of the small cut that was mde to fold the metal.
I think I would be more inclined to try these:
(http://i.ebayimg.com/t/Enclosure-DIY-guitar-pedal-aluminum-sloped-LOT-10-PIECES-/00/s/MTA3MVgxNjAw/$(KGrHqV,!jcE9KeHkWd6BPUqW4L0q!~~60_12.JPG)
http://www.ebay.com/itm/180834001655?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Hi Guys and Girls,
This is mike from pedalenclosures. The new ONE enclosure is a bit thinner in the walls than the YY (I learned a few things casting the YY).
These are made right here in the US, specifically for the pedal market, not offshore...
If you have any questions, just ask, I've been on this board for years, sadly not much time for building these days...
thanks,
m.
Oh, and thanks for posting that Strange!
Just put up a couple new pics of the ONEs up on the site. I've got gloss black, gloss white, red apple flake and metallic blue ones in late last week. I'll have those up shortly - just gotta take pics.
m.
Quote from: tskullt on April 22, 2012, 04:37:19 PM
Oh, and thanks for posting that Strange!
Just put up a couple new pics of the ONEs up on the site. I've got gloss black, gloss white, red apple flake and metallic blue ones in late last week. I'll have those up shortly - just gotta take pics.
m.
Not a problem - I love your products.
Quote from: tskullt on April 22, 2012, 04:28:06 PM
If you have any questions, just ask, I've been on this board for years, sadly not much time for building these days...
thanks,
m.
Mike,
Can you put more detailed dimensions on your web site for this enclosure? What are the depths inside the enclosure?
Thank you
Yep, It'll be up soon. I've nearly got the drawing laid out. Had some web site fun and games that set me back a bit...
m.
Seconding the request for more info on your website. Photos of inside, the connection between lid and box, dimensions, etc.
I've added more pics added to the ONE enclosure section on my site as well as a FAQ page that has a diagram of the ONE's dimensions. I haven't had time to get more pics done of the inside, but I did add a pic of the bottom plate fastened to the enclosure. I've countersunk the screws on the plate so the enclosure could be easily velcro'd to your pedal boards.
Any other questions, just ask...
m.
Quote from: Strange on April 22, 2012, 03:45:51 PM
I think I would be more inclined to try these:
(http://i.ebayimg.com/t/Enclosure-DIY-guitar-pedal-aluminum-sloped-LOT-10-PIECES-/00/s/MTA3MVgxNjAw/$(KGrHqV,!jcE9KeHkWd6BPUqW4L0q!~~60_12.JPG)
http://www.ebay.com/itm/180834001655?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Those are really cool, but it does not include inner screw holes.. plus don't they need to be threaded?
Some kind of self tapping screws would be my initial thought.
Quote from: ~arph on April 24, 2012, 10:32:18 AM
Quote from: Strange on April 22, 2012, 03:45:51 PM
I think I would be more inclined to try these:
(http://i.ebayimg.com/t/Enclosure-DIY-guitar-pedal-aluminum-sloped-LOT-10-PIECES-/00/s/MTA3MVgxNjAw/$(KGrHqV,!jcE9KeHkWd6BPUqW4L0q!~~60_12.JPG)
http://www.ebay.com/itm/180834001655?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Those are really cool, but it does not include inner screw holes.. plus don't they need to be threaded?
I use self-tapping on my Prism line, works just fine...
m.
Quote from: ~arph on April 24, 2012, 10:32:18 AM
Those are really cool, but it does not include inner screw holes.. plus don't they need to be threaded?
I chose to leave this alone, mainly due to the whole standard vs. metric issue. Also, someone might want to use a specialty fastener for aesthetic purposes.
It's hard to tell from the pics, but the outer shell has pilot holes already, so all you would have to do is tape the two pieces together to locate holes for the tabs (if you wanted to pre-drill for a threaded fastener or a standard sheet metal screw). You would have to look up what diameter to drill for the specific size sheet metal screw you were interested in, same for a machine screw before tapping. Or a self-tapping screw would work as well.....