MXR Time Delay Troubleshooting [With Pics]

[The_Bloody_Omen]

Dear DIYstompboxes forum,

Thank you for your time but to make a long story short, I have a M-166 Time Delay pedal from the 80's and it has a bypass signal then when engaged also has a clean bypass signal. Do not have a schematic but can get one if needed. Where should I start?

Thank you,
The_Bloody_Omen

[armdnrdy]

First off,

It's a bit strange to be addressed as "Dear" from someone with a moniker of The_Bloody_Omen!

And second, The subject of this thread is: Re: MXR Time Delay Troubleshooting [With Pics]

There isn't any "Pics"

[Dave W]

It's a bit strange to be addressed as "Dear" from someone with a moniker of The_Bloody_Omen!

  Well played Larry; well played...

Without any more info I will venture a guess that there is no delayed signal.
Please post pix & description of the problem.

[The_Bloody_Omen]

Ok ill be back with the pics but so far I need to do a retro fit for a SAD4096 chip with the MN3205 which has 8 DIP while the original has 16 and is pretty much extinct.

I found this on it but am having trouble figuring out how to connect the new circuit to the board and where the peices go on the new pvc:
http://www.diystompboxes.com/smfforum/index.php?topic=63905.0

Thank you for your time,
The_Bloody_Omen