Small Clone Stereo Paralooper Problem

[lars-musik]

Hello everybody,

First of all, let me than you for your work on this wonderful website – the spare time I do not spend on soldering I do on reading your post.
I need your help on a somewhat overdone project. As a birthday present I am trying to build a versatile bass chorus. The basis is the Tonepad Small Clone with the stereo mod and incorporated flange and depth mods. Now I'd like to add a dry/wet blend knob and a master volume for both channels. Therefore I build two moosapotamus' paraloopers. As the thing is meant to have a signal on both channels even when bypassed, a buffered splitter/millennium 2 bypass is also on board.

Now everything sounds fine but I can't work out how to wire the paralooper to the second output. Do I have to cut traces on the stereo board? Where do I have to grab the signal for the paraloopers "send" and "input" pads?

Any help is highly appreciated as the birthday present is due on Monday.
Here are the links to the schematics/layouts used in the project:
Small-Clone: http://www.tonepad.com/project.asp?id=8
Paralooper: http://www.moosapotamus.net/paralooper.html
and http://www8.plala.or.jp/KandR/cir_bassthru.html respectively
Roseblood's Millenium Stereo Bypass: http://forum.musikding.de/cpg/albums/userpics/23524/bufferboard_final.gif

I know the two paraloopers are like taking a sledgehammer to crack a nut, but that's the way it should be.

Thanks a lot in advance, Lars

Here's the project so far (dreadfully sketched, sorry)