Subcommander Perf/Vero

[jishnudg]

So I tried perfboarding this recently, and went a little nuts (something of a beginner in this,so..) - - so I was keen to know if anyone here has managed it in perf,vero, maybe point to point conceptually, have any particular methods been adopted? like a separate board for every component (remember reading an old thread where someone tried this) etc etc

[tubegeek]

Something like this, I think you'd go nuts trying to test/debug it at the end. So maybe a section at a time, and test by section?

That'd indicate chopping it into sub-boards, each with a testable input and output.

Pretty ambitious! You go girl!

[jishnudg]

Hehe..this should be a forum effort

[wavley]

The MFOS Subcommander?  That's one heck of a job to perf!

[jishnudg]

So I just started this last night, decided to do it in a modular fashion - - here's the input (the easiest bit) -

https://drive.google.com/file/d/0BwMVia471c4Sdlpjb0NPQTRMQms/edit?usp=sharing

There may be some errors, so this may need an extra pair of eyes to go over it Will try to roll out the next few sections over the coming weekend.

[jishnudg]

Module 2 - - the second quad opamp. Maybe the 4013 should be on this board as well....

https://drive.google.com/file/d/0BwMVia471c4Sb2NpemhGa3l0VFU/edit?usp=sharing

[jishnudg]

For some reason, Google Drive isn't displaying the files in preview,but if you follow the link, then go to File>>Download (within Drive) the working .png file gets downloaded.

[jishnudg]

Module 2, with the 4013 added on board..

https://drive.google.com/file/d/0BwMVia471c4SSEloZDVENEpmUG8/edit?usp=sharing