FSB Aqua Puss build problem

Started by BDuguay, January 10, 2015, 05:24:25 PM

Previous topic - Next topic

BDuguay

We have lift off!
I had taken the trim pot out to test and be sure it wasn't faulty and that gave the opportunity to measure it properly and put it somewhere in the middle. To make things easier I put sockets in so I could easily remove the trimpot if need be. I took your advice and set the voltage at pin 7 to 4.8volts and it fired up straight away.
Thanks again to all for your help and guidance!
B.