Help identifying an old wah shell

[cordovaplata]

I received this dead wah shell from a friend, I refurbushed just the switch and the inductor, the shell is missing the lid. I searched on the internet for pictures of this shell with no results. Any ideas what this might be?
P.D. The wah was black 

Pictures:

[smallbearelec]

It looks like a Crybaby. If you can find one in a shop, hold yours up against the bottom to see if the plate is the same size and holes are in the same place. If so, you need a standard bottom plate:

http://smallbear-electronics.mybigcommerce.com/bottom-plate-for-expression-pedal-shell/
http://smallbear-electronics.mybigcommerce.com/bottom-plate-for-the-crybaby/

Regards
SD

[joegagan]

That is a new one on me.  Internally they seem to have cloned a post 89 dunlop cb. The cheap jacks and front silkscreened plate have a certain asian flair. But that art deco inspired exterior is its own thing isn't it?

[cordovaplata]

Right. Also, the inductor looks like something I've never seen before. What it is giving me a hard time identifying is the front plate, most wahs have plastic jacks at the sides!

[deadastronaut]

i have the volume pedal version of this...

its a...



unfortunately i removed/replaced the rubber pad with its name on....and can't remember what it was..

[deadastronaut]

got it...my vol pedal is a ''DENIO VP'' 

not the same size as a dunlop...a bit broader, same length-ish though..

same enclosure as

http://www.effectsdatabase.com/model/dixon/cbwahwah#

[anotherjim]

The inductor is on a standard "blank" bobbin. They are usually wound to suit. I think my old Vox fuzz-wah had that type, but it's long gone - and that ain't no Vox shell.
Is there any ID on the copper side of the pcb?

I think it's a Denio, going by a volume pedal I found that looks like Rob's...
http://www.pksmusic.com.au/showProduct/Sold+Items/Effect+Pedals+Sold/DVP/Denio+Volume+pedal

[anotherjim]

Damn! You beat me!

[deadastronaut]

you gotta be quick..

[cordovaplata]

Magnificent work! It looks like I need to learn more about wah history :/
I had the PCB and did the schem, it was a regular wah circuit, nothing fancy.
Unfortunately, I trew the PCB away since it was heavily cracked and the copper traces were corroded as well.