Source for the Alpha 16mm SPST On/Off fuzz pot?

[Nocaster Cat]

Mouser used to carry them but it looks as though they're breaking away from Alpha. I'm looking for a B1K with solder lugs, thanks.

[smallbearelec]

Mouser used to carry them but it looks as though they're breaking away from Alpha. I'm looking for a B1K with solder lugs, thanks.

When I enter the Mouser number 313-1100F on -line, the results show the parts with the 20-type (PC Vertical) terminal. But the Alpha part number shows the 10-type term, which is solder lug. You might confirm with Mouser which you actually get. Sorry I can't help you immediately; Analog Mike asked me to carry these for customers who want them for repairs, and I keep forgetting to add them to our regular factory order.

[peterg]

Second section:

http://www.a1parts.ca/Potentiometers.htm

[Nocaster Cat]

Mouser used to carry them but it looks as though they're breaking away from Alpha. I'm looking for a B1K with solder lugs, thanks.

When I enter the Mouser number 313-1100F on -line, the results show the parts with the 20-type (PC Vertical) terminal. But the Alpha part number shows the 10-type term, which is solder lug. You might confirm with Mouser which you actually get. Sorry I can't help you immediately; Analog Mike asked me to carry these for customers who want them for repairs, and I keep forgetting to add them to our regular factory order.

Steve...will you be carrying them at some point?

[davent]

I've used the ones made by CTS, small in size however, not cheap and they have a 1/8" shaft so you need to find or make a bushing to use with 1/4" hole knobs.
(Canadian dollars)
http://www.digikey.ca/product-detail/en/270X232A102B1B1/CT2224-ND/203805
dave

[smallbearelec]

Steve...will you be carrying them at some point?

At some point, yes. I'll order one from Mouser and see if, as I suspect, the posted pic is wrong. If so, I'll order a few more from them and sell at a small loss. Will then order bulk from the factory for delivery on the boat in February.

[Nocaster Cat]

Steve...will you be carrying them at some point?

At some point, yes. I'll order one from Mouser and see if, as I suspect, the posted pic is wrong. If so, I'll order a few more from them and sell at a small loss. Will then order bulk from the factory for delivery on the boat in February.

Cool, thanks!