Tayda enclosure screws

[Mgt280y]

Evening does anyone know what screws the tayda boxes use I need some longer ones
Thanks dan

[armdnrdy]

6-32 screws.

Standard size...you can get them anywhere.

[Mgt280y]

Is that the same as an M3.5 - 0.6 pitch

[armdnrdy]

Is that the same as an M3.5 - 0.6 pitch

That's what conversion charts state.

[davent]

I have a thread IDer kit , the M3.5 is labeled as Metric Coarse and it's not interchangable with 6-32 or 6-40.
I have no idea whether the M3.5 coarse in my kit is 0.6 pitch but it's much finer then a 6-32.

Further searching found a chart that shows the coarse is 0.6 pitch.

http://www.newmantools.com/tech/threadm.htm

dave

[Mgt280y]

Yeah I tried one the 3.5/0.6 is to fine there isn't a conversion from 6 - 32 might just re tap to m4 as I have them tayda and the U.K. Doesn't always work when we are in metric