Maestro Fuzztone Fz1a owners INFORMATION NEEDED PLEASE!!

[Atodovax]

Hello everyone. Im trying to clone a Fz1a and i found that there are two schematics on internet. One shows two 2.2k resistors in series two ground from q2 base and the gain pot in parallel to the last one and a 0.01uf output capacitor (this schematic is shown on the coda effects website). Then there is another one with a 0.0033uf output capacitor and the resistor network from q2 base has a 2.2k and. 22k resistor after to ground paralleled with the gain pot. I been following the Smallbear article about the Fz1a and purchased a kit with great results but i would like to see the voltages of an original unit. If someone could share the voltages on their original pedals o share what combonations of HFE and leakage got the best results on your clones i would appreciatte it. Thanks everyone!!