Reverb driver kit or circuit (PCB) recommendations

[aefpv]

Does any have any recommendations for a Reverb driver kit or circuit (PCB) that could drive my reverb tank.  It is a MOD 8FB2C1B tank that has an input impedance of 1,925 Ohm and output of 2,575 Ohm.

I had made a Swart style Reverb circuit and installed into my Mojotone VibroChamp.  The modification created reverb, but it was not robust.  Also, it did not work well with the tremolo portion of the amp, so I had to remove it. 

I am hoping to find a reverb driver, whether solid state or tube driven, that can be independent of the amp.

Thanks

[willienillie]

That's the same tank the Blues Jr uses, rip off their circuit.  But don't expect Twin Reverb performance from those short tanks.  And some of the more recent MOD tanks are screwy, too short and dull.  The Korean-made (Belton) Accutronics are better than the last runs of US-made Accutronics, but still not the best.  It's been a race to the bottom with reverb tanks IMO.

Oops, sorry, I misread "8FB..." as "8EB..."

[MaxPower]

Probably not much help but Everyday Practical Electronics had a reverb tank project a while back. If you can find the issue it is in, you can buy the digital version for a couple of US dollars. Or maybe someone will upload it for you (someone here does that once in a while).