Pt2399 based delay resistor sub

[Locrian99]

Hello,

Quick question.   I thought I had some 12k resistors and I don't.   Should I be fine subbing out a 10k for the circled 12k here.   Would rather not run in series if I can get away with the 10k.

Thanks

[Ripthorn]

That will set the overall output gain of the circuit. Going to 10k will reduce output slightly.

[antonis]

Going to 10k will reduce output slightly.

From 1.545 to 1.454 or about half a decibel, to be more presice..
(not counting R15 & LEVEL pot..)

[Locrian99]

Awesome thank you exactly the info I needed.

[Ripthorn]

Going to 10k will reduce output slightly.

From 1.545 to 1.454 or about half a decibel, to be more presice..
(not counting R15 & LEVEL pot..)

Because it's an investing stage, it will actually go from 0.6 to 0.5, or 1.6 dB, no?

[antonis]

Because it's an investing stage, it will actually go from 0.6 to 0.5, or 1.6 dB, no?

But of course..!!
(my bad..)