Advice needed on a component swap

[Guitarist335]

Hi folks:

I am interested in building a Punch Amp that I found on this site. More specifically, it is the one found here. https://www.diystompboxes.com/smfforum/index.php?topic=99271.60

It is the one posted by chptunes, entitled Re: PUNCH - 1W amplifier. On his post, it has a picture of their build omn a perf board, followed by the schematic.  Here are the questions I need help with:

1.  The schematic calls for a 2N5457 transistor. I don't have one of those, but I have a slew of transistors including:
BC327, BC337 BC517, BC547, BC548, BC549, BC550, BC556, BC557, BC558, S8050,S8550,S9012,S9013,S9014,@N3904, 2N3906, C1815, A1015, 13001. 

I also have a 2N22222A-2, which I understand is fairly generic.

I am wondering if I can use any of the above transistors, in place of the 2N5457 transistor that the schematic calls for?

2. The schematic also calls for a TDA7052A Op Amp. I don't have one of those, but I have TL072, TL082, TL081, 4558D and 741.

I am wondering if I can use any of the above Op Amps, in place of the TDA7052A Op Amp that the schematic calls for?

As you can probably guess, I'm a novice in this and your appreciate your advice and expertise.

Thank-you

[idy]

The 2n5457 is a JFET. I think all the ones you have are BJT. Different animals.

The TDA7052 isn't an opamp, although the symbol on the schematic looks like one, it is a an audio power amp chip designed to deliver power to a speaker. Opamps not so much.

[Guitarist335]

Idy: Thank-you for the clarification. Back to the drawing board. Does anyone know ion a simple Punch Amp schematic that utilizes the parts that I listed above?

[antonis]

You might utilize a couple of BJTs (or an op-amp) for input buffer, any op-amp for signal amplification (in case of TLXX you may omit input buffer) and several BC337/327 and/or 2N3904/3906 in parallel for output power stage..
(and a couple of BJTs wired as diodes, in case of diodes lack..)