Bipolar Transistor Cookbook

[Chillums]

Lots of good info here, I'll put this all into a single .PDF file at some point...

PART 1
https://www.nutsvolts.com/magazine/article/bipolar_transistor_cookbook_part_1
PART 2
https://www.nutsvolts.com/magazine/article/bipolar_transistor_cookbook_part_2
PART 3
https://www.nutsvolts.com/magazine/article/bipolar_transistor_cookbook_part_3
PART 4
https://www.nutsvolts.com/magazine/article/bipolar_transistor_cookbook_part_4
PART 5
https://www.nutsvolts.com/magazine/article/bipolar_transistor_cookbook_part_5
PART 6
https://www.nutsvolts.com/magazine/article/bipolar_transistor_cookbook_part_6
PART 7
https://www.nutsvolts.com/magazine/article/bipolar_transistor_cookbook_part_7
PART 8
https://www.nutsvolts.com/magazine/article/bipolar_transistor_cookbook_part_8

[antonis]

Very good work of Ray Marston, indeed..

CAUTION: (for noobs..)

There are a few text/schematics typos/inconstensies so, in case of modifying circuits, make yourselves sure for particular circuit correctness..

e.g.
https://www.nutsvolts.com/magazine/article/bipolar_transistor_cookbook_part_2 Figure 18 text calls for 10M input impedance where schematic says 3M3..
https://www.nutsvolts.com/magazine/article/bipolar_transistor_cookbook_part_8 Figure 22 text calls for R1/Rx ratio gain where it should be R4/Rx..