Led's in Easy Vibe

[Bill_F]

I'm about to start on the easy vibe over at Geofex. Could anyone tell me the orientation of the 4 LED's that are used with the LDR's. Is the postive side to the right or the left as your looking at the layout.

http://www.geofex.com/PCB_layouts/Layouts/easyvibe.pdf

Thanks all,
Bill

[Bill_F]

OK...so uh...anybody?  :?:

I'm going to start building this bad boy tomorrow and could use some help here.

Thanks all,
Bill

[petemoore]

The line on the LED or flat side, should go toward the neg side...I can't tell much from the layout.   they ever lit for me was with the non neg side toward pos. rail

[petemoore]

I need the schematic !!

[Bill_F]

I need the schematic !!

Yeah! I can't figure out from the parts layout what the negative side is. I was hoping that somebody who built it could just tell me right or left when looking at the board.

I can't wait to hear this thing. I love that Bridge of Sighs sound.  :lol:

[Peter Snowberg]

Looking at the layout from GEO you posted..... The cathodes are all on the same side, and R1 connects with the cathode of LED1. You can also look for connections on two of the LEDs to pin 4 of the opamps.

I'm not going to try to use left/right.

-Peter

[Bill_F]

Thanks Peter,