Wiring in MXR Microamp to stay on all the time?

[Duke of Metal]

hey guys,
I have an MXR Microamp that I took the DPDT Switch out of because I needed for another thing thats more important.

My question, how do I wire the MXR Microamp so that it stays on all the time?? reason being is I am going to add it to my main rig and use it as an active buffer (set all the way down) and I dont think it'll be turned off anyways.

Any info would help help.


thanks,
Duke

[Brian Marshall]

Solder the pcb input to the input jack... solder the output (mosly likey on the pcb) to the output jack.

is it a factory microamp or a diy?
 
It's kind of hard to describe if you cant trace it out your self.

[Duke of Metal]

Solder the pcb input to the input jack... solder the output (mosly likey on the pcb) to the output jack.

is it a factory microamp or a diy?
 
It's kind of hard to describe if you cant trace it out your self.

Thats a factory microamp...

[Brian Marshall]

your probably going to have to figure out how to trace it out your self.  its really not that hard.

[nirvanas silence]

Get a schematic and trace the circuit to find the circuit input and output.  Then connect those to their corresponding jacks.