News:

SMF for DIYStompboxes.com!

Main Menu

9v adapter plug

Started by cahannon, June 01, 2004, 06:25:58 PM

Previous topic - Next topic

cahannon

I have a female 9v adapter with three prongs one is + I guess but does this need to be grounded? or is one of the prongs for a - connection?
It is for a mouser part number
163-4302
http://www.mouser.com/catalog/specsheets/041699.pdf
Check out the diagram of the part I cant figure it out myself thanks so much

niftydog

man we get this a lot lately...

It's a switched socket.  One pin is permanantly connected through.  the other two pins are connected together when there is NO jack in the socket; they disconnect when a jack IS in the socket.

This allows the action of inserting a jack to disconnect the battery supply, and connect the external supply.

A few seconds with a continuity tester on a multimeter will tell you which pins are which.

In fact, if you look carefully at the link you provided, it provides the answer for you.  Look at the second drawing down on the left side.
niftydog
Shrimp down the pants!!!
“It also sounded something like the movement of furniture, which He
hadn't even created yet, and He was not so pleased.” God (aka Tony Levin)

Peter Snowberg

Can sombody point to a good diagram where the pins are listed? This thread should go the FAQ because it is something that most people deal with on every build with a power jack. :D

Take care,
-Peter
Eschew paradigm obfuscation

Paul Perry (Frostwave)

Quote from: Peter SnowbergCan sombody point to a good diagram where the pins are listed? This thread should go the FAQ because it is something that most people deal with on every build with a power jack. :D
-Peter

Ahhh.... I think there is more than one kind of power switched socket, so a diagram won't really help, unless it has a specific part number beside it.