Original Maxon TS808 Circuit (ALOT OF PICS)

[dirkfunk]

Hey guys, found this orginal ts-808 (or what i think is a original) and need some help with some unconnected wires. These were unconnected when i found it and have no idea where there home is. I could only find 1 original shemactic but i had a hard time reading the switch and pot connections.

I was wondering if anyone could help me wire up a 3pdt switch. I have circled all the wires that are not connected to anything. Also the 20k pot and 500k pot are both missing the 1st lug wires?  As seen in the photos. Thanks alot for your time!!!

[analogguru]

The gray wire (marked on the PCB with 6) should be connected to the 20k-pot (arrow marked connection).

500k remains unconnected.

The red wire (marked on the PCB with 12) goes to the anode of a LED.
Kathode of this LED (pink wire) connects to PCB number 3.

analogguru

[dirkfunk]

alright sounds great. thanks for the help. now all i need is the 3pdt switch wiring!!!!

[MartyMart]

There's a link to an article by Robert Keeley, which was posted in a Guitar magazine, to make a TS circuit true bypass . . . . . . .
www.robertkeeley.com
have a nose around for the link, ( could be within the 808 mods section ) if you can't find it, mail him I'm sure he will send it to you as a PDF or link you to the mag in question.
Alao I'm sure it came up here, have you done a search ? "true bypass ts9' or something will do ??
Marty.

[dirkfunk]

actually if anyone could help me wire up even a dpdt switch that would be great.

[MartyMart]

dirk ---- PLEASE PLEASE do a simple search, its come up about a thousand times   !!!!!!!!!!!!!!
Marty. :twisted: