My First Vero Layout

[hilbi]

This is my first contribution to the DIY community. I created a vero layout for the IC Buffer circuit that is available on http://www.generalguitargadgets.com/index.php?option=content&task=view&id=156&Itemid=190. I know it is dead simple circuit, but you gotta start somewhere and I needed this vero   .

The original circuit was designed by Jack Orman.



I left out the popping resistor because I want to use this circuit in an "always on" mode.

I didn't build it yet, so it needs to be verified. Wich I'm going to do this week. If you find any mistakes please let me know.

I used the Stipboard Layout Tool, free available here http://diy.musikding.de/berichte/grund/striplayout/striplayout1.html

[MartyMart]

Nice one !
I can't build it to check at the 'mo but a buffer is always useful !
This "vero-board" building is great, I've just done several circuits and will
post them this week, just have to draw up and check 'em  

Regards,
Marty.

[Dragonfly]

very cool !
keep 'em coming !
its amazing how much you can learn from doing vero layouts....

andy

[petemoore]

Cool !!!
 I tried the Vero thing, works, but I can't seem to get it to stay on the computer...saved it to desktop, different places...only comes up when I click on the link and download it each time...DAFT !!!
 I found a batch of perfs, bout used that up now....next boards I get'll be Veroboards...looks like that's the way I'll be doing it if there is a layout provided...THANKS FOR THE LAYOUTS !!! I haven't tried any yet...but...Really,,,ThankS Everybody [and you know who you are !!1} !!!
 Or until I figure out how to get that veryboard thing to stay loaded on this dern puter !!!

[Fret Wire]

Hilbi, nice work It's not so bad of a program once you give it a try.

Pete: it doesnt download into the HD like a regular program.  Save it to your desktop, Documents, or wherever. Unzip the folder, and place it in a new folder of your own. Then click on it when needed. When you save a layout, save it to the folder you created.


Tip: After a layout is finished and saved, hit PrtScn. Then open MS Paint-click new, then paste. Then you can add more colors, graphics, and notes. You can also just paste the grid layout on MS, rotate it, and use the vero layout symbols for MS Paint.

[hilbi]

Hilbi, nice work  It's not so bad of a program once you give it a try.

It is a very good program once your used to it, i only wish you could change the stripboard layout to horizontal.