AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

GE Diodes- will these work? They're matched?

Started by jimbob, January 08, 2009, 08:59:57 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jimbob

January 08, 2009, 08:59:57 PM
 I needed some ge diodes to finish a few projects so I went to the local NTE supplier and cross referrenced 1n34a to nte 109, 110, and 110mp (matched pair). Heres the data sheet http://www.nteinc.com/specs/100to199/pdf/nte110mp.pdf I assume these will work as a replacement 1n34a?
"I think somebody should come up with a way to breed a very large shrimp. That way, you could ride him, then after you camped at night, you could eat him. How about it, science?"

km-r

#1
January 08, 2009, 09:11:41 PM
of course... i think most Ge diodes will work well for 1n34... if the application is not very spec-critical...

what projects are you referring to? if its signal clipping, it should work.
Look at it this way- everyone rags on air guitar here because everyone can play guitar.  If we were on a lawn mower forum, air guitar would be okay and they would ridicule air mowing.

jimbob

#2
January 08, 2009, 11:30:58 PM
This is for the COT50
"I think somebody should come up with a way to breed a very large shrimp. That way, you could ride him, then after you camped at night, you could eat him. How about it, science?"

mikemaddux

#3
January 09, 2009, 05:22:16 AM
Thats wierd, I just did the same thing today.  got 2 matched pairs of 110mp today
Completed Builds: A lot...
Print
Go Up Pages1
User actions