Filter cap +-?

[WorkBench]

I have a radial filter cap 5600uf/100v, and I can't tell which terminal is + and which is -.  Are there markings on it or something that delineate the polarity?  Thanks!
Chris

[Dan N]

It should be marked!

Failing that, The pos end usually has a crimp around it. Sometimes the neg lead is shorted to the can.

Edit- Sorry, I think I was talking about axial? Does yours have BP written on it? Sometimes bi-polar caps mess me up when looking for the polarity markings...

[WorkBench]

No BP, and there is no crimp, and the neg lead is not shorted to the body.  There are 3 lines on one of the rivets and there is a band down one side of the cap.  Thanks!
Chris

[Ry]

Does the band run from the top of the cap to the bottom with one leg directly under it?  If so and if I were to guess, that would be the negative side of the cap.

Ry