Ph-1 Schematic

[Blackie]

Hi All!

Im new here and i have a little problem with my Ph-1. I have noticed that some wires are cut on the board, but i have no idea how to repair it. Is there the possibility to have the schematic or a repair manual for this phase?

I know the Roland society don't send schematic ecc.


Thank for your helps.


Blackie from Italy

[Blackie]

Anyone can help me?



Blackie

[puretube]

not a schem, but maybe helpful:
http://diystompboxes.com/sboxforum/viewtopic.php?t=28758

[Bucksears]

Blackie,
1) Does the Phaser work at all right now? If so, is there a problem with the sound?
2) What color/how many wires appear to be cut?

I have the PH-1R in pretty much mint condition, but can take a look inside to see if there are any similarities.

[Blackie]

Puretube, thanks for the link!

Bucksears: Inside the pedal there are some solder places without wires. They are 1, 2, 6, 10 and 15 (its localized at the center of the board). I think that the place number 10 is for voltage because there is a diode just after it. 7 and 4 are connected with a pot ( the value is 1M C). 5 and 9 for the led and 3, 14, 8 are connected with the other pot ( 100K B).

The pedal dont work right now. So i have no clue about it.


Regards

Blackie from Italy


Ps.

Sorry for my horrible english