Modded Controfuzz vero layout

[RLBJR65]

Mods from this thread - http://www.diystompboxes.com/smfforum/index.php?topic=35975.0 Thanks Marty and Mark !
Schematic, vero and pcb layout http://aronnelson.com/gallery/GretschControFuzz
Layouts are not tested so if anyone sees anything wrong please let me know.

Richard

[MartyMart]

Richard, nice work !
I had a "five minute" check over and it looks fine ....
I LOVE that little "pin3-pin5" link, never thought of that before !!
I have a switch on mine for a group of Ge diodes, which gets quite
"Full on" it's a 3x and 2x combo of 1N90's black case glass jobbies.
Great and thanks for taking the time to draw it up !!

Marty.

[RLBJR65]

Marty, thanks to you and Mark for pointing out this effect and making it more usable!
If your using an IC socket those jumpers fit nicely under them. Its a little tricky without a socket but can still be done by soldering an insulated wire on the back side of the board.

Tons of mods possible. Have you tried any hard clipping? That may be interesting.