"Mr Crunch" booster/OD UPDATED SCHEM

[petemoore]

  Yupp, exactly what I was thinking...took me only a few secs to find it, measuring across the 10k and finding 10k but thumbuzz was 'pulled down' so to speak...the opamp side of the 10k wouldn't let a buzz or click get to output, the other side of the 10k would...had to be the diodes or something so I pulled the diodes off and Boost !!!
  It'll be a simple task to put a DC Blocker before the diodes.

[MartyMart]

Sorry guy's my mistake on the schem .....
ahem, diodes are right before output pot, so its 10k ->4u7 ->1n/ diodes to ground -> 100k pot
I'll update it once more ...

Marty.

[Fret Wire]

It seems like you'd want the 1n after the diodes, to smooth some of the diodes's harsh high end just before the output. Something like:

4.7uf > 10k > diodes > 1n > 100k pot

my .02 

[MartyMart]

It seems like you'd want the 1n after the diodes, to smooth some of the diodes's harsh high end just before the output. Something like:

4.7uf > 10k > diodes > 1n > 100k pot

my .02 

Yup, that's    >diodes/1n ->  in parallel to ground .....
.... I must have lost the plot yesterday ....

M