GGG MXR Phase 100 build question

[piperbob]

I have nearly all the parts to finish off my MXR Phase 100 pedal except 3 capacitors. On the schematic 3-15uf elctrolytics are called out. Well guess what! I don't have them in my parts box the caps in question are c-14/15/17 on: http://www.generalguitargadgets.com/diagrams/mxr_p100_lo.gif
I have some 10mfd's  and some 22mfd's in my parts box that could be used. Is either one of these values acceptable as a substitute for the 15mfd? any input would be appreciated.

[petemoore]

  Not as good at reading layouts as schematics...takes too much sstudy...
  Probably these are not in the signal path, IWCase using 22uf's [with adequate voltage ratings] will work fine.
  If they are in the signal path or somehow directly influence signal somehow, 22uf compared to 15uf is most likely hardly a noticable amount.

[piperbob]

Thanks for the info.