0.1 uf cap question

[Easywider]

Building the octavia & soldered 1 of the 0.1uf caps in the wrong place . leads were two short to go where it really supose too . numbers on the cap are as follows : 6F6 104J . went to radio shack today for a quick replacement , & found a 0.1 uf , 2A 104K , 50WVDC max , operating temperature -40 to +185F . just want to make sure its a good replacement , its green & a little bigger as well . i ordered low voltage caps for the whole build , is that o.k.?

Thanks !

[enigmur]

It should work fine, it is the same value + the voltage is heaps enough

http://www.electronics2000.co.uk/calc/index.htm this is a very handy site for understanding those codes on the Caps

[Easywider]

enigmur , Thanks For the Heads Up & url !