News:

SMF for DIYStompboxes.com!

Main Menu

dumb question

Started by PurpleTheory, December 01, 2005, 11:16:53 PM

Previous topic - Next topic

PurpleTheory

I wanted to build this to go with my ROG Condor, i'm just a little confused about what goes to which pins on the opamp:



Thanks, and sorry about the dumb question  ::)
Matt

pyrop

Looking from the top of the chip the red numbers on the schematic correspond with the numbers on the chip (TL072)

PurpleTheory

Thanks for the help   ;D
matt

pyrop

No worries, good luck with the build




pyrop  ;)

MartyMart

This thing goes very well in front of the condor, did you read stm's comment about
"matching" the diodes ?
If you can get all the Ge's to read the same forward current, say 0.2 v
and the two Si's matched too, it could sound very nice !
Luck,
Marty.
"Success is the ability to go from one failure to another with no loss of enthusiasm"
My Website www.martinlister.com

Steben

why are those silicon ones connected at both ends? just can't see why...
  • SUPPORTER
Rules apply only for those who are not allowed to break them