TS-9 Reissue LED Series Resistor value??

[jedhiggs]

I can find tons of threads with people talking about it but I haven't seen which resistor value is connected directly to the LED (pink wire)...any help would be great...I got the soldering iron all warmed up haha

[twabelljr]

     The pink wire in mine (TS-9 RI) goes to an 8.2k resistor.
This schem. shows a 3.6k:

May be the original?

[jedhiggs]

I'm almost certain mine's leading to a 360k  but i dont wanna replace the wrong one...shouldn't this LED series resistor be the same on each TS9??  This is really bizarre but thanks!

[Fret Wire]

100 ohm, in conjunction with a zener diode.

[twabelljr]

     Yep. I just re--checked, and mine is 8.2k. (gray/red/red). From there it goes to a zener diode like the schematic. I checked the resistance with a DVOM to make sure. Strange. I wonder why the difference?

[twabelljr]

     If you are replacing the LED, just use whatever value corresponds to the new LED's ratings.
See here: http://www.muzique.com/schem/led.htm

[jedhiggs]

Augh, Fret Wire says its the 100 ohm and the schematic says its the 3.6k and they're right next to each other!  Ah, i dont know which one deals right with the LED...