Wiring help wanted!

[jorgenkjellgren]

Hi guys,

I´m building a minoboost using this layout: http://aronnelson.com/gallery/album18/AMZ_MINIBOOSTER_VERO

and I am using this layout for wiring: http://generalguitargadgets.com/diagrams/switch_lo_dpdt_std.gif

Two questions:
How do I find "output" from the board?
And what do I do with lug 2 on the pot?

Thanks, Jörgen

[burnt fingers]

the output from the board goes to the pot.  lug 3 i believe.  Lug 1 goes to ground, lug 2 goes back to the switch.  Lug 2 is effectively the output from the board.

I believe the layout you posted has this information on the notes.

Scott

[jorgenkjellgren]

Thanks a lot!
I went back and looked at another layout and came to the same conclusion as you.
I appreciate your help!

Jörgen