AMZ FX ANALOG ALCHEMY GEOFX MEF ROG DIY WIKI

LED indicator causing clicks

Started by amz-fx, April 08, 2006, 09:46:31 AM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 4
User actions

gez

#60
April 19, 2006, 11:45:13 AM
Quote from: puretube on April 19, 2006, 10:22:25 AM
did I "heard that"?

Made by Kingbright...as in ***kingbright!

http://pdf1.alldatasheet.com/datasheet-pdf/view/116317/KINGBRIGHT/L7113SEC-H.html

Went to their website and it looks as though it's no longer made (non RoHS), but they have ones around the 5000 mcd mark.  Only drawback is they only have a 20 degree view angle...good enough for me.
"They always say there's nothing new under the sun.  I think that that's a big copout..."  Wayne Shorter

RDV

#61
April 19, 2006, 11:58:05 AM
Flux baaaadd!!

RDV

Gilles C

#62
May 04, 2006, 09:27:38 PM
I just remembered what I was using for the LEDs in the last ones I built, and it seemed to work well, if I remember well of course...

I was using a bicolor LED and was only swithing the color of the LED with 2 transistors, so I think there was no clicks because of that.

I'm about to work on effects again, so I'll check that again.

Gilles
Print
Go Up Pages 1 2 3 4
User actions