Dr Boogey vero layout

[bancika]

Can anyone make this one please
Yesterday I etched PCB for it and it didn't turn out good. Out of 5 PCBs I made only on was flawless...except for it's wrong size, so I had to trow it away. So I'm not etching any more, only vero board
It is popular pedal as I can see so many people could use it, and I don't know how to make one good. Now you've got the tool to make it easy
www.storm-software.co.yu/DIYLayout.exe
It was easier for me to make software than layout itself
Cheers

[donald stringer]

That is one on my list also, right after I get done with this bullitt project. By what I seen on this forum you will not have to wait long.

[Connoisseur of Distortion]

that would be a massive piece of vero... better plan for a 1590BB or better 

if you want a board, i'm sure someone could etch one for you and send it...

[MartyMart]

I made one on veroboard, it's BIG ! about 10 strips X 34 holes !
With all the knobs, it wont go in a 1590BB, a more simple tonestack helps
( gain/tone/volume )

Overall sound is great, but you loose the flexibility ....
MM

[bancika]

If that vero board can fit it's all right. I will use 13mm knobs so all can fit inline in 1590BB.

Damn, I never liked ething anyway. And this time I put too much hydrogen into HCl so it (over)etched board in 2 seconds! Then it started spilling on my window melting everything metal on the way smelling awfull (and toxic) and looked like boiling-greeny-stinky-smokey-stuff...
I'm usually more careful when doing this, but I was so nervous that day...   
Kids, do not try this at home