Tremulus lune perfboard layout.

[burnt fingers]

greetings,

I was wondering if anyone had a good perfboard lyout for the tremulus lune.  I'm thinking of building one but I do not do PCB's as of right now.  I ususally do my own layouts for my builds but this one looks like it could be a little tricky so I thought I'd see if anyone else has done it and has a decent layout. 

Thanks
Scott

[iorr]

Hi,
never seen this on perfboard. I've got the homemade pcb version and this thing rocks. It's really the "übertremolo".

Karsten

[Processaurus]

See this?

[burnt fingers]

Thanks, I had seen the vero layout however I've never done any vero work before.  I use the pad per hole stuff like all the ROG projects.

Scott

[burnt fingers]

bump ......anyone,  Beuler, beuler, beuler......

[mydementia]

You know, Scott...I was a perfer myself...until I discovered how easy vero building is.  It's almost like populating a built/purchased PCB.  One thing I've learned is to scrape between the 'tracks' with a small screwdriver to get any wayward solder/gunk out of the circuit.  My last two vero builds had strange problems upon initial startup but worked just fine after scraping between the 'tracks'. 
If you have access to some veroboard, I recommend a small project - maybe one you perfed and want to rebuild.  Torchy's layout archive (http://www.indyguitarist.com/torchy/) is absolutely awesome.  As are several of the galleries here (I've made several from the Dragonfly gallery - great stuff). 

I'm going to try Torchy's Tremulus Lune vero as soon as I get through the other 6 projects on my pile...

Don't fear the vero...
Mike