Ibanez OD880 Vero Layout

[MartyMart]

http://aronnelson.com/gallery/Martys-layouts-and-photos/Ibanez_OD880?full=1

I was so impressed with this, that i did a very quick layout for it.
Just one "messy" jumper wire at the end, but I was trying to keep it
as small as possible, for three single OA's
Could be built with a dual and  one single, but i wanted to keep to the
original specs as much as poss.
Enjoy

Marty.

[petemoore]

  Vero's a good stuff for those wanting to not PCB and have a nice, tight, well designed looking working circuit board.
  Thanks again for contributing again a VerO Layout !!
   Cool...can't quite tell, may be a TS ?
  Is there a schematic available for this one?
  ...I love perf, but find schematics invaluable for 'beastial' information...ie, the type and nature of the beast...how to excite or tame it...
 

[MartyMart]

Pete, sorry the schem is in another post :  http://eu11.stripper.jp/pulcino/blog/archives/000004.html

There you go !

Thanks,
Marty.

[alteredsounds]

Thanks Marty, much appreciated

[MartyMart]

For a better "Drive" range, swop R6 and C3 around and change them to a 2k7 and a 100n

If you want to go "wild" try a 470 ohm and 1uf !!  .... but then you'll have a "RAT" more or less !!
with no "clean" signal at min drive ....

Marty.

[Toney]

     

Very quick on the draw, nice one.